Spring Sprinkler Startup & Pressurizing in Memphis & Shelby County
Ready to turn your sprinklers back on? Our spring sprinkler startup safely re-pressurizes your irrigation system after winter, tests every zone, and catches freeze damage before it wastes water. A standard residential startup is $140. Our annual maintenance packages bundle spring startup, fall blowout and inspections.
Spring sprinkler startup, done right
Turning a system back on too fast can send a pressure surge through the lines that cracks fittings and pops heads. After a Memphis winter there may also be hidden freeze damage in pipes, valves, and the backflow preventer. A professional spring sprinkler startup brings your system back online slowly and tests everything, so problems are fixed before the summer heat. In the fall, book our separate sprinkler winterization to protect it again. Off-season, we keep systems efficient to EPA WaterSense standards.
What’s included in your spring startup
Slow, safe pressurizing
We open the supply gradually and bleed air from the lines to avoid pressure shock.
Zone-by-zone test
We run every zone and check that heads pop up, rotate, and cover the lawn properly.
Backflow check
We reopen and inspect your backflow preventer — the most freeze-vulnerable part of the system — for cracks and leaks.
Controller reprogramming
We set your smart or timer controller for spring so watering matches Memphis weather, not last year’s schedule.
Leak & damage spotting
Startup is the ideal time to catch cracked lines, broken heads, and leaks left behind by winter.
Right-timed scheduling
We schedule you after the last hard frost, so a late freeze can’t catch your system full of water.
From booking to a protected system
Book your visit
Call or request a free quote and tell us roughly how many zones you have.
We time it right
We schedule after the last hard frost — usually mid-to-late March in Memphis.
Pressurize & test
We slowly pressurize the system, then run and inspect every zone.
Walkthrough & report
We flag anything that needs attention and set your controller for the season before we leave.
Local experts who save you water
Up to 30% water savings
Smart scheduling and leak-free design cut waste and shrink your monthly bill.
Fast, same-week response
We’re your neighbors, so scheduling is quick and follow-up is easy.
Licensed & certified
Fully insured, with a state-certified backflow tester on staff for compliant work.
Spring sprinkler startup across the Memphis metro
We start up irrigation systems throughout Memphis and Shelby County — from East Memphis and Germantown to Collierville, Bartlett, Arlington, Eads, Piperton, and Rossville.
Spring Sprinkler Startup — Common Questions
When should I start my sprinkler system up in spring?
Start up after the last hard frost, usually mid-to-late March in Memphis. We pressurize the system slowly to avoid pressure shock, then test every zone so it’s ready before the growing season.
Why not just turn the water back on myself?
Opening the valve too fast can send a pressure surge through the lines that cracks fittings and pops heads. A professional startup also catches freeze damage from the winter before it turns into a leak or a dead zone.
How much does a spring sprinkler startup cost?
A standard residential spring startup is $140. Larger and commercial systems are quoted individually. Fall winterization is a separate $140 service.
Is a spring startup the same as winterization?
No. Winterization is done in the fall to blow the water out of the lines before a freeze. A spring startup turns the water back on, slowly re-pressurizes the system, and tests every zone. Each is a separate $140 visit.
What if my system was damaged over the winter?
We’ll find it during the startup — cracked pipes, broken heads, or a leaking backflow preventer — and give you a clear repair quote before any extra work is done.
Related services
Sprinkler Winterization →
Fall blowouts that protect your pipes from freezing — $140.
Sprinkler Repair & Diagnostics →
Fast fixes for broken heads, leaks, and dead zones.
Sprinkler System Installation →
Custom-designed, professionally installed in-ground irrigation.
Irrigation Design →
Scaled plans that map every zone, head and valve — from $85.
Certified Backflow Testing →
State-certified annual testing, filed with your utility.
Smart Weather Controllers →
WiFi controllers that cut watering up to 30%.
Drip Irrigation →
Low-flow watering for planters, beds, and gardens.